flysky
FlySky G7P+ 10-Channel ANT 2.4GHz Surface Radio w/ FS-R11P Receiver – FSY-FS-G7P+
FlySky G7P+ 10-Channel ANT 2.4GHz Surface Radio w/ FS-R11P Receiver – FSY-FS-G7P+
Couldn't load pickup availability
Take control of advanced RC builds with the FlySky G7P+ 10-Channel ANT Surface Radio System – FSY-FS-G7P+.
Designed for RC cars, drift cars, crawlers, trucks, boats, and other surface applications, the G7P+ expands on the popular G7P platform with 10 control channels, an upgraded interface, increased model memory, and the included FS-R11P 11-channel receiver.
FlySky's ANT 2.4GHz protocol provides reliable two-way communication with 4096-step channel resolution for precise steering, throttle, and auxiliary control.
The G7P+ also includes useful programming features for advanced builds, including channel speed adjustment, throttle cut, Idle Up, timers, rate and curve settings, servo frequency adjustment, receiver firmware updating, channel expansion, and integrated SVC support.
A high-density foam steering wheel provides comfortable and precise control, while the built-in USB Type-C port allows firmware updates through FlySky software.
Key Features
-
Genuine FlySky G7P+ radio system
-
10-channel surface transmitter
-
FS-R11P 11-channel receiver included
-
2.4GHz ANT protocol
-
4096-step resolution
-
20-model memory
-
Approx. 300m+ unobstructed ground range
-
High-density foam steering wheel
-
128 x 64 LCD display
-
USB Type-C data / firmware port
-
Supports receiver firmware updates
-
Integrated SVC functionality
-
Beginner mode
-
Timer and lap counter
-
Rate and curve adjustment
-
Channel speed adjustment
-
Throttle cut
-
Idle Up
-
Servo frequency adjustment
-
Failsafe support
-
Supports channel expansion
-
Compatible with FlySky ANT receivers
-
Designed for RC cars and boats
What's Included
-
(1) FlySky FS-G7P+ 10-Channel Transmitter
-
(1) FlySky FS-R11P 11-Channel Receiver
-
(1) High-Density Foam Steering Wheel
-
(1) USB Type-C Cable
-
(1) User Manual
Transmitter Specifications
Brand: FlySky
Model: FS-G7P+
Product Type: Surface Radio System
Channels: 10
Frequency: 2.4GHz ISM
Protocol: ANT
Resolution: 4096
Compatible Models: RC Cars / Trucks / Boats
Model Memory: 20 Models
Display: 128 x 64 Monochrome LCD
Range: 300m+ Ground Range Under Unobstructed Conditions
Input Voltage: 4–9V DC
Power Options: 4 x AA Batteries or 2S LiPo with JST Connector
Low Voltage Alarm – AA: Below 4.2V
Low Voltage Alarm – 2S LiPo: Below 7.2V
Data Port: USB Type-C
Firmware Updates: Supported
Charging Port: No
Antenna: Internal Single Coaxial Antenna
Dimensions: 136.4 x 111.8 x 197.5mm
Weight: 305g
Included Receiver
Receiver Model: FS-R11P
Protocol: ANT
PWM Outputs: 11
Signal Outputs: PWM / PPM / i-BUS / S.BUS
Operating Voltage: 3.5–9V DC
Receiver Dimensions: 37 x 25 x 13.3mm
Receiver Weight: Approx. 10g
The included R11P allows direct use of multiple PWM channels without requiring a separate channel expander.
Compatible Receivers
The G7P+ works with compatible FlySky ANT protocol receivers, including:
-
FS-R11P
-
FS-R4P
-
FS-R4B
-
FS-R7P
-
FS-R7V
-
FS-R7D
-
Other compatible FlySky ANT receivers
Recommended Applications
Ideal for:
-
RC Drift Cars
-
Rock Crawlers
-
Scale Trucks
-
Competition Crawlers
-
On-Road Cars
-
Off-Road Cars
-
RC Boats
-
Vehicles requiring multiple auxiliary channels
-
Lighting / winch / dig / rear steer setups
